
System utilities & auxiliary equipment
Electric heating steam generator
Electric heating steam generator from the supplied catalogue, LDR 0.8 MPa series. The 6–36 kW range delivers 8–50 kg/h of steam at up to 170 °C from a 380 V supply, with microcomputer control, automatic water make-up and a stainless-steel cabinet. Six models share one 705 × 710 mm footprint; larger 48–360 kW units and parallel operation are covered in the same catalogue.
Tell us your product, target output and packaging requirements.
Product overview
Electric heating steam generator from the supplied catalogue, LDR 0.8 MPa series. The 6–36 kW range delivers 8–50 kg/h of steam at up to 170 °C from a 380 V supply, with microcomputer control, automatic water make-up and a stainless-steel cabinet. Six models share one 705 × 710 mm footprint; larger 48–360 kW units and parallel operation are covered in the same catalogue. The six model columns above are transcribed from the 6–36 kW table in the supplied catalogue, in the same order as the model range. The catalogue also lists 48–96 kW, 108–192 kW and 216–360 kW parameter tables and states that several units can run in parallel; those figures are not copied into this page. The photograph is the catalogue cover unit and carries the maker's own panel lettering. The steam heating system around it is shown in the diagram below as three blocks — RO water generator, water storage tank and steam generator — each described in the package section.
Technical specifications
Reference information from the current equipment catalogue. Final configuration, output and supply scope are confirmed for your project.
| Model range | LDR-0.008-0.8-30L / LDR-0.012-0.8-30L / LDR-0.017-0.8-30L / LDR-0.025-0.8-30L / LDR-0.034-0.8-30L / LDR-0.05-0.8-30L |
|---|---|
| Heating power | 6 / 9 / 12 / 18 / 24 / 36 kW |
| Rated evaporation | 8 / 12 / 17 / 25 / 34 / 50 kg/h |
| Rated working pressure | 0.8 MPa |
| Power supply | 380 V |
| Steam temperature | ≤ 170 °C |
| Water volume | < 30 L |
| Power consumption | 7.1 / 10.1 / 13.1 / 19.1 / 25.1 / 37.1 kW/h (as printed in the catalogue) |
| Weight | 118 / 118 / 118 / 118 / 118 / 132 kg |
| Dimensions (L × W × H) | 705 × 710 × 1200 mm (6–24 kW) · 705 × 710 × 1400 mm (36 kW) |
| Connections | Safety valve DN20 · water inlet DN20 · steam outlet DN15 · drain DN15 |
| Shell material | Stainless steel |
| Heating elements | 1 (6–24 kW) / 2 (36 kW) |
| Steam start-up time | 3–5 min |
| Larger models in the catalogue | 48 / 54 / 72 / 96 / 108 / 144 / 192 / 216 / 360 kW; multiple units can run in parallel |
| Controls & protection | Microcomputer control, ABB components, built-in high-pressure make-up pump; eight protections (dry-run, leakage, over-pressure, over-temperature, over-heat, self-diagnosis, heating tube, water-cut check valve) |
Production line applications
Application suitability is confirmed against your materials and target output.